News: Quick Tips

Stacey talks about the importance of taking the time to do things right the first time and not settling for, "it works fine." Especially when it comes to thing electrical and fuel related. These will always come back to bite you.

When working on suspensions, you are going to have to separate the ball joints and tie rod ends. Stacey shows you a few tricks on how to do this with out the need to invest in specialty tools.

Stacey shows you a quick, cheap, and easy way to cut a straight and square cut on round pipe with your band or hacksaw.

Stacey shows you an easy way to stop all of that transmission fluid from spilling all over the place when you pull it out of the car.

Stacey shows you an easy way to drill holes in painted panels without chipping that nice paint job you have!

Stacey shows you a quick and easy way to bead roll the end of your hard lines without needing to invest tons of money in a bead roller.

Having the right tool makes all the difference. Stacey shows you the best way to smooth those edges on your metal pipes after you cut it to size so you don't tear your hands up.

Stacey shows you a great way to thread bolts into soft metals like aluminum or sheet metal as many times as you would like without the stripping out on you.

Stacey walks you through different ways you can wire dual batteries in your vehicle and talks about what is the BEST way.

Stacey shows you a simple way to keep from losing your grip on those nuts and bolts while you work a tight space.

Stacey walks you through several ways to foil those who are looking to steal your ride. They range from simple free ways to some that are a little more in depth. Either way, they work great to stop people from making off with your car.

Wanna easy way to wire up your tail lights without letting a bunch of dirt and debris into the lens? Check out this Quick Tip from our friends at Daystar.

Stacey shows you a way to make a custom clamp you help you with all of those odd shaped pieces from your project.

Stacey shows you a simple way to add or replace rubber grommets to your project.

Stacey talks about the best and easiest way to cut your new carpet to fit.

Stacey shows you a simple way to make a straight cut in round tubing.

Stacey shows you a simple way to get a perfectly straight cut when splitting rubber tubing, no matter how long the piece.

Stacey shows you an easy and reliable way to prevent a dead battery

Stacey shows you the best and easiest way to lower your ride by cutting the springs.

Stacey gives you a simple way to set a depth gauge when drilling

Stacey gives you a quick and easy way to keep your paint can clean after pouring out what you need

Get the 411 on using stainless steel bolts on your project.

Make your own magnetized Screwdrivers

How to stop things from flying around the shop when cutting with dikes

Use women's lingerie to pick up parts in tight places.

Use a spray paint can cap to hold your wire while soldering.

Use metal plant hangers to hang your parts before painting them.

Use a piece of rubber hose to help change out a spark plug .

Make your own sheet metal break.

Clean out wax residue from those nooks and crannies on your car

There is an alternative to using Anti-Seize.

Make your own "copper spoon" for filling holes.