Fill out my online form.
Universal Joint Tip
March 08, 2011
If you are using a Universal Joint on your ratchet and you need to keep it locked in a position until you can get it on the nut or bolt, fill it with a bit of Hub grease. It will old it in almost any direction you need until you can get it onto the part you need to turn. It'll also make sure your joints stay well lubed.
Thanks for the tip Matt M. from Buffalo, NY!
Recent News
Jeepster Moving on up to a Level 2 Restoration
Last season Stacey rolled in a barn find 1967 Jeepster convertible and demonstrated how to do a Level 1 restoration on it by getting it running and driving again.April 24, 2024
The Hot Rod Coupe: Fitting body and sheet metal - Mighty Mite
The Hot Rod Coupe is back in the shop as Stacey continues to fit the old ’40 Chevy body down on the new replacement frame.April 17, 2024
Prepping for surgery; the Level 4 project.
When it comes to working on a vehicle, nothing quite prepares you for the first time you pull a body off a frame. Even though it sounds easy, there is MUCH more involved than meets the eye.April 10, 2024