Degreasing Power 2

March 08, 2011
Quick Tips
Kevin Powell from Bluffton, IN says: The best thing to use when degreasing an engine, tranny, or transfer case is Easy Oven cleaner. This stuff is tough and will eat through any grease, including some paint so be careful! It also works great on 4 wheelers. Spray on, let it soak for a few minutes and powerwash off. Good as new! Stacey's Comments: ? You?re right. Easy-off is a good way to knock off some nasty gook. Generally this stuff works even better then the degreasers you?ll find at the auto parts stores. As you mentioned though, this stuff can ruin paint as well as some rubber gloves, plastics (not to mention your eyes and lungs) that degreasers won?t harm, so be careful what you spray it on and make sure the area/space is well ventilated.

Recent News

  • Jeepster Moving on up to a Level 2 Restoration

    Last season Stacey rolled in a barn find 1967 Jeepster convertible and demonstrated how to do a Level 1 restoration on it by getting it running and driving again.
    April 24, 2024
  • Andrew Collins, executive editor of THEDRIVE.COM calls in to talk with Stacey about what THE DRIVE is all about, his early days getting into all things automotive - including his time as an off-road g
  • The Hot Rod Coupe: Fitting body and sheet metal - Mighty Mite

    The Hot Rod Coupe is back in the shop as Stacey continues to fit the old ’40 Chevy body down on the new replacement frame.
    April 17, 2024
  • Prepping for surgery; the Level 4 project.

    When it comes to working on a vehicle, nothing quite prepares you for the first time you pull a body off a frame. Even though it sounds easy, there is MUCH more involved than meets the eye.
    April 10, 2024
  • Stacey ZOOMs into the magic of the internet to chat with Tony Muckleroy from JEEPTALKSHOW.com to deep dive about all things JEEP and more!

  • Watch the Jeep Gladiator go from stock to a fully outfitted search & rescue vehicle now for free!
Fill out my online form.