The Latest

  • Miller Welding and Cutting Tips for Gearz #1

    Miller Welding and Cutting Tips for Gearz MIG Welding Tips If you have always wanted a welder, but don't know which process is best for you, the most logical choice for starting out is the MIG process. MIG welding is the easiest to learn and can be used for most common materials such as mild steel, stainless steel, and aluminum. The MIG process can be used to weld materials from 24 gauge (.024" thick) to 1/2" thick in a single pass.
    March 08, 2011

  • In a Tight Spot

    Tip from Stacey for fine detail work
    March 08, 2011

  • Miller Tip 2: Improve Cut Quality

    Metal cutting with plasma cutters has become so easy that it's tempting to take your new plasma cutter out of the box and go to work. But before you get started, here are a few tips to and some simple practices that can improve your cut quality.
    March 08, 2011

  • Avoid Cracks

    Tip from Stacey
    March 08, 2011

  • Avoiding Restoration "Lemons"

    Brandon Fountaine from Milwaukee, WI says:
    March 08, 2011

  • Axle Seals

    Outer Axle Seals Tip
    March 08, 2011

  • Bending Metal

    Bob Thomas from DuBois, PA says:
    March 08, 2011

  • Carburetor Work Stand

    Bill Lindig from Brooklyn Center, MN says:
    March 08, 2011

  • Cheap Tire Shine

    Shaun Hopkins from Baltimore, MD says:
    March 08, 2011

  • Check It Carefully

    Something to consider...
    March 08, 2011

  • Clean the Windows

    See clearly and smell like a pickle?
    March 08, 2011

  • Cheap Insurance

    Tip from Stacey...
    March 08, 2011

  • Neat Wiring

    Tip from Stacey...
    March 08, 2011

  • Keeping the Wires Straight

    A great way to keep your wires straight uses plastic tag ties and clothes pins...
    March 08, 2011

  • Loosen a rusted bolt?

    Loosen a rusted bolt? Look no further than your kitchen...
    March 08, 2011

  • Multi-Use Baby Wipes

    Wipe away the gunk on your interior...
    March 08, 2011

  • Low on Dielectric Grease?

    In a bind and can't find your dielectric grease?
    March 08, 2011

  • Mud Removal

    Ryan Piche from Edmonton, Alberta says:
    March 08, 2011

  • Milk Crate Step Up

    Put away the inverted 5 gallon bucket and build a simple crate step up.
    March 08, 2011

  • Magnetic Pickup

    Tip from Stacey...
    March 08, 2011

  • Keep Organized - Down to the Nuts and Bolts

    Mike Counas from Columbia, SC says...
    March 08, 2011

  • Polyurethane Bushings

    Freeze em...
    March 08, 2011

  • Bigfoot 4x4, The Original Monster Truck

    Stacey and Crew took to the road in the ice and snow, and visited the legendary Bigfoot 4X4 shop in St. Louis! What a great time it was!

    February 01, 2011

  • The Arbor Press

    What’s Workin at the GEARZ shop? Stacey was using an Arbor Press while working on a Bronco this week for an upcoming Episode.

    January 27, 2011

  • Twists And Turns Ahead

    What’s Workin at Stacey David’s GearZ studio? We are going to start adding some GearZ Team updates to the blog to help keep you guys in the loop of what is going on around here.

    January 20, 2011

  • REVELL & Stacey David’s GearZ® ANNOUNCE NATIONAL MODEL CAR CHAMPIONSHIPS

    "Sponsored by: TESTORS

    January 01, 2011

  • SEMA Show 2010

    Well, it’s that time of year again and the SEMA show is approaching fast.
    October 19, 2010

  • THE V8 INTERCEPTOR

    The idea for the V8 Interceptor has been bangin’ around in my head for a number of years, just waiting for a chance to get out.

    July 27, 2010

  • News Updates.... We're Back!!!!

    It has been a while since any new episodes of GearZ have aired on Speed.  Well, that is all about to change!

    May 28, 2010

  • Advanced Plating Survives the Nashville Floods !

    Our friends at Advanced Plating in Nashville have survived the (grossly under-reported) Nashville Floods, thanks to the quick work of owner Steve Tracy and good friends pitching in.

    May 21, 2010

  • Flying with the Blue Angels

    As I sit here on the runway about to take off……my mind drifts off to all the thousands of other flights I’ve made over the years that are full of drowsy passengers mindlessly scanning the Sky Mall

    May 05, 2010

  • Speedracer

    You know, it's always amazing to talk to other gearheads and car nuts and see what kind of automotive influences they have had.

    March 17, 2010