Tips: Degreasing Power 2

Degreasing Power 2
Tuesday, March 8, 2011
admin

Kevin Powell from Bluffton, IN says:

The best thing to use when degreasing an engine, tranny, or transfer case is Easy Oven cleaner. This stuff is tough and will eat through any grease, including some paint so be careful! It also works great on 4 wheelers. Spray on, let it soak for a few minutes and powerwash off. Good as new!

Stacey's Comments: ?

You?re right. Easy-off is a good way to knock off some nasty gook. Generally this stuff works even better then the degreasers you?ll find at the auto parts stores. As you mentioned though, this stuff can ruin paint as well as some rubber gloves, plastics (not to mention your eyes and lungs) that degreasers won?t harm, so be careful what you spray it on and make sure the area/space is well ventilated.

Login or register to post comments

More Tips

Multi-Use Baby Wipes: A great way to get the gunk off of your steering wheels, vinyl, leather, etc. is Pampers baby wipes (the ones in the blue/green container).
Neat Wiring: Use rubber grommets when running wiring through metal firewalls, fenders, dashes, etc. Also don?t forget to use wire looms and wire ties to
Ohms Law for Light Amps Draw: Ohms Law for light amps draw: Watts/Volts = Amps 100 Watts /12 Volts = 8.3 amps Double that number to find Amp draw on 2 light systems etc.
Other uses for waterless hand soap: Larry N. suggests: "When pulling wire or tubing through really tight grommets, reach for your can of waterless hand soap. Spread this
Polishing Aluminum Wheels: Jake Rupp from Dayton, PA says: "Sometimes when you finish polishing the Aluminum wheels, it can look a little hazy from the polish. An easy
Polyurethane Bushings: Freeze polyurethane bushings before installing them. This shrinks them and makes them a lot easier to install. They have a lot less give
Quick fix for a leaky radiator...: From Hamilton, Ontario: Another tip for a leaky radiator - your site mentions using an egg in a pinch to plug a leak, but the question is,
Quick Cleanup: "On the trail, a pressurized weed sprayer makes a great makeshift pressure washer. Pump it up, point and shoot. Also handy for cleaning mud
Quick Fix for Chrome Rust: Doug Thorsteinson sends the following tip: "For all you gearheadz out there...if you are making a fun weekend toy, not a full custom car,
Miller Welding and Cutting Tips for Gearz #1: Miller Welding and Cutting Tips for Gearz MIG Welding Tips If you have always wanted a welder, but don't know which process is best for
In a Tight Spot: For fine detail work, I found that using a large, rectangular eraser (like the ones you had in elementary school) worked very nicely to
Miller Tip 2: Improve Cut Quality: Metal cutting with plasma cutters has become so easy that it's tempting to take your new plasma cutter out of the box and go to work. 
Avoid Cracks: Don't flush a hot motor and radiator with cold water. This can cause cracking to modern blocks and heads that have thin walled castings.
Avoiding Restoration "Lemons": Brandon Fountaine from Milwaukee, WI says: "What you should do if you encounter a semi-rust free auto you are interested in buying is to
Axle Seals: Rod Steinley from Edmonton Alberta, Canada says, "When replacing the outer axle seals and you don't have the proper seal driver, simply use
Bending Metal: Bob Thomas from DuBois, PA says: "Metal Brakes are expensive. You can easily make a break out of your vise by using pieces of 2x4s. You cut