Get the 411 on using stainless steel bolts on your project.
Tips: Quick Tip - Steel Bolts
Quick Tip - Steel Bolts
Tuesday, August 9, 2011
GearZ Team
Login or register to post comments
shablow_airspray
A little tip we use in the Truck Garage everyday for those gaskets that are in tight places or overhead. Clean surfaces as normal, apply Super 77 spray on Adheasive to one or more sides of the gasket and stick it into place. now it sits there waiting for you to stab the part onto it. Tip of this tip: keep in mind the poor sap that will have to someday make this repair again. Apply the adheasive to one side of the gasket, stick the gasket to the part. then install the part into the tight area. this way when the part is removed the gasket stays on the part and you do not have to run a gasket removal tool over your head to remove the material.
Nov 26, 2011 04:39 pmMore Tips
Quick Tip: Keep Your Car From Getting Stolen: Stacey walks you through several ways to foil those who are looking to steal your ride. They range from simple free ways to some that are a
Quick Tip - Project Build Book: Stacey shows you a great way to keep your project builds organized with all of the info in one easy place with this project build book.
Quick Tip - Wire Grommet and Boot From Daystar: Wanna easy way to wire up your tail lights without letting a bunch of dirt and debris into the lens? Check out this Quick Tip from our
Quick Tip - Replacing Rubber Grommets: Stacey shows you a simple way to add or replace rubber grommets to your project.
Quick Tip - Custom Clamping: Stacey shows you a way to make a custom clamp you help you with all of those odd shaped pieces from your project.
Quick Tip - Cutting Round Tubing: Stacey shows you a simple way to make a straight cut in round tubing.
Quick Tip - Replacing Carpet: Stacey talks about the best and easiest way to cut your new carpet to fit.
Quick Tip - Trickle Chargers: Stacey shows you an easy and reliable way to prevent a dead battery
Quick Tip - Splitting Rubber Tubing: Stacey shows you a simple way to get a perfectly straight cut when splitting rubber tubing, no matter how long the piece.
Quick Tip - Cutting Springs: Stacey shows you the best and easiest way to lower your ride by cutting the springs.
Quick Tip - Pouring Paint: Stacey gives you a quick and easy way to keep your paint can clean after pouring out what you need
Quick Tip - Make A Depth Gauge For Drilling: Stacey gives you a simple way to set a depth gauge when drilling
Quick Tip - Steel Bolts: Get the 411 on using stainless steel bolts on your project.
Cleaning Metal Dust From Magnet: My quick tip that maybe someone else might appreciate as much as I did, is simple, and I'm sure, unoriginal. I pretty much keep a handy
Troubled Trouble Light?: Next time that old incandescent bulb goes out in your trouble light try replacing it with one of those compact fluorescent types "CFL". I
Welding Lens Need Replacing?: If you're like me and do lots of welding and hate when your lenses get hard to see through, try this; Instead of replacing your welding
