Stacey gives you a simple way to set a depth gauge when drilling
Tips: Quick Tip - Make A Depth Gauge For Drilling
Quick Tip - Make A Depth Gauge For Drilling
Tuesday, August 9, 2011
GearZ Team
Login or register to post comments
hughbie
I found from doing some woodworking....this same tip with the addition of one thing.
When you put the tape on the drill bit, leave a short tab of tape sticking out from the drill bit. This will spin with the bit AND brush away all the chips so you can see the tape line easier. It acts like a small fan.
I love this site!
Hugh
More Tips
Quick Tip - Replacing Carpet: Stacey talks about the best and easiest way to cut your new carpet to fit.
Quick Tip - Trickle Chargers: Stacey shows you an easy and reliable way to prevent a dead battery
Quick Tip - Splitting Rubber Tubing: Stacey shows you a simple way to get a perfectly straight cut when splitting rubber tubing, no matter how long the piece.
Quick Tip - Cutting Springs: Stacey shows you the best and easiest way to lower your ride by cutting the springs.
Quick Tip - Pouring Paint: Stacey gives you a quick and easy way to keep your paint can clean after pouring out what you need
Quick Tip - Make A Depth Gauge For Drilling: Stacey gives you a simple way to set a depth gauge when drilling
Quick Tip - Steel Bolts: Get the 411 on using stainless steel bolts on your project.
Cleaning Metal Dust From Magnet: My quick tip that maybe someone else might appreciate as much as I did, is simple, and I'm sure, unoriginal. I pretty much keep a handy
Troubled Trouble Light?: Next time that old incandescent bulb goes out in your trouble light try replacing it with one of those compact fluorescent types "CFL". I
Welding Lens Need Replacing?: If you're like me and do lots of welding and hate when your lenses get hard to see through, try this; Instead of replacing your welding
Quick Tips - Wire Cutters : How to stop things from flying around the shop when cutting with dikes
Quick Tips - Screwdrivers : Make your own magnetized Screwdrivers
Quick Tips - Panty Hoses : Use women's lingerie to pick up parts in tight places.
Quick Tips - Soldering Clamp : Use a spray paint can cap to hold your wire while soldering.
Quick Tips - Soldering Clamp : Use a spray paint can cap to hold your wire while soldering.
Quick Tips - Changing Spark Plugs : Use a piece of rubber hose to help change out a spark plug .
