Stacey shows you a way to make a custom clamp you help you with all of those odd shaped pieces from your project.
Tips: Quick Tip - Custom Clamping
Quick Tip - Custom Clamping
Tuesday, August 9, 2011
GearZ Team
Login or register to post comments
tooljunkie
love the clamp.
For the grommets,i use a drop of crazy glue to connect the ends together,less likely for them to work out.
ever have a stuck or squeaky something or other you cant reach,or didnt want to spray the lube all over everything?
the plastic tubes arent always long enough or need to go around a corner,strip a piece of 14 or 16 guage wire and slip another tube into the 1"piece of insulation.slide it onto the spray can's "noodle" and you now have a bendable long reach spray lube.
More Tips
Quick Tip: Keep Your Car From Getting Stolen: Stacey walks you through several ways to foil those who are looking to steal your ride. They range from simple free ways to some that are a
Quick Tip - Project Build Book: Stacey shows you a great way to keep your project builds organized with all of the info in one easy place with this project build book.
Quick Tip - Wire Grommet and Boot From Daystar: Wanna easy way to wire up your tail lights without letting a bunch of dirt and debris into the lens? Check out this Quick Tip from our
Quick Tip - Replacing Rubber Grommets: Stacey shows you a simple way to add or replace rubber grommets to your project.
Quick Tip - Custom Clamping: Stacey shows you a way to make a custom clamp you help you with all of those odd shaped pieces from your project.
Quick Tip - Cutting Round Tubing: Stacey shows you a simple way to make a straight cut in round tubing.
Quick Tip - Replacing Carpet: Stacey talks about the best and easiest way to cut your new carpet to fit.
Quick Tip - Trickle Chargers: Stacey shows you an easy and reliable way to prevent a dead battery
Quick Tip - Splitting Rubber Tubing: Stacey shows you a simple way to get a perfectly straight cut when splitting rubber tubing, no matter how long the piece.
Quick Tip - Cutting Springs: Stacey shows you the best and easiest way to lower your ride by cutting the springs.
Quick Tip - Pouring Paint: Stacey gives you a quick and easy way to keep your paint can clean after pouring out what you need
Quick Tip - Make A Depth Gauge For Drilling: Stacey gives you a simple way to set a depth gauge when drilling
Quick Tip - Steel Bolts: Get the 411 on using stainless steel bolts on your project.
Cleaning Metal Dust From Magnet: My quick tip that maybe someone else might appreciate as much as I did, is simple, and I'm sure, unoriginal. I pretty much keep a handy
Troubled Trouble Light?: Next time that old incandescent bulb goes out in your trouble light try replacing it with one of those compact fluorescent types "CFL". I
Welding Lens Need Replacing?: If you're like me and do lots of welding and hate when your lenses get hard to see through, try this; Instead of replacing your welding
